DeskProto to preview 123WaxRing system at Baselworld jewelry show.
For immediate release, March 2008.Utrecht (the Netherlands) -- March 31, 2008
Delft Spline Systems announces an addition to its DeskProto CAM software: the 123WaxRing system. This new system (patent pending) is meant for jewelers, and makes creating jewelry wax models easier than ever before. 123WaxRing will be presented at the Baselworld jewelry show, held in Basel (Switzerland) from April 3 to April 10. You can find it a the stand of DeskProto reseller Horbach: Hall 3.U, Stand M10.
Waxmodel for ring in white gold with 32 small diamonds, created using 123WaxRing by Atelier de Bruijn (NL).
The 123WaxRing system makes CNC machining your wax model easier than 3D printing it: using pre-shaped wax disks, a special fixture and smart software, milling has become a push-the-button process. No need to prepare a wax block, change tools, reconfigure a fixture or reset the zero point: three times fasten one single screw is all you need to do.
The toolpaths are prepared by the 123WaxRing wizard, which runs in the DeskProto software. Required input is an STL file, from any jewelry design program. The system will be shown using a Roland JWX-10 wax milling machine, it can be used on any 4 axis CNC milling machine though.
"Jewelers have been asking us to combine DeskProto with a fixture." says Lex Lennings, product manager for DeskProto and 123WaxRing. "We are very proud of this new solution which is more than just another fixture: it makes creating jewelry wax models significantly easier than with other solutions."
123WaxRing is aimed at jewelers, to allow in-house manufacturing of wax models. Not only ring models are possible: it is also easy to create wax models of charms, pendants and alike designs.
About BaselworldBaselworld is a yearly trade-show for the watch and jewelry industry worldwide. Over 2,000 exhibitors - specialists in watches, jewelry, precious gems and related brands - showcase their products to over 100.000 visitors. The show is located in Basel (Switzerland), April 3 - 10, 2008. For more information see www.baselworld.com
About 123WaxRing and DeskProtoDeskProto by Delft Spline Systems is the 3D CAM program that has made CNC milling a competing technology for Rapid Prototyping, and 123WaxRing is an optional extra to DeskProto. Key features are the ease of use (the system is aimed at designers, not at CAM specialists) and the low price. For more information see www.123waxring.com and www.deskproto.com.
About HorbachHorbach Giesstechnik from Germany is a specialty shop for the jewelry manufacturing industry. Since over 80 years Horbach offers machines, tools and supplies for the design and production of jewelry. For more information see www.horbach-giesstechnik.de (in German).
Illustration:The illustration is available for download in two resolutions:
www.deskproto.com/photos/123-bruijn-side3-wax.jpg (250 x 200 pixels, 17 Kb).
www.deskproto.com/photos/123-bruijn-side3-wax-large.jpg (2200 x 1800 pixels, 746 Kb).
And in addition an illustration of the resulting ring:
www.deskproto.com/photos/123-bruijn-result-large.jpg (960 x 640 pixels, 70 Kb).
Caption for this illustration is : "Waxmodel for ring in white gold with 32 small diamonds, created using 123WaxRing by Atelier de Bruijn (NL)."
For more informationFor more information on this press release contact Lex Lennings of Delft Spline Systems
Tel +31 30 296 5957, Fax +31 30 296 2292, Email email@example.com
DeskProto is a registered trademark of Delft Spline Systems.
123Ring is a Trade Mark of Delft Spline Systems.